Tag Archives: Project Essex

Commodore SX-64 1541 Floppy Drive Repair

The Commodore 1541 floppy diskette drive is notorious for breaking down. The Commodore SX-64 floppy drive is no different. As I continue my Commodore SX-64 restoration, I find that the 1541 floppy drive doesn’t read diskettes any more and makes a chattering sound when attempting to read a disk. In this video, I walk through how to diagnose the SX-64 floppy drive as well as possible remedies before finally replacing the 1541 mechanism with a standalone drive.

Commodore SX-64 Keyboard Repair

The Commodore SX-64 keyboard is usually the first thing to fail on these old systems. As such, I need to repair the keyboard on this SX-64 restoration. To begin, I’ll need to DIY an SX-64 keyboard cable from a 25-pin serial cable. I’ll use the SX-64 replacement keyboard cable to diagnose problems with the membrane keyboard itself and resurface the SX-64 membrane keyboard. Finally, I’ll rebuild the plastic shell of the SX-64 keyboard with Bondo automotive filler in order to get the SX-64 keyboard as close to the original stock look as possible.

Commodore SX-64 Blank Screen Fix

In my quest to restore the Commodore SX-64, my first obstacle was the lack of video signal on the internal monitor. I needed to diagnose the Commodore SX-64 video signal before I would be able to move on to any other Commodore SX-64 repairs. In this video, I will go through the process to diagnose a Commodore SX-64 blank screen and step through how to repair a Commodore SX-64 blank screen. In this video, I’ll go over how to build a DIY Commodore AV cable, how to reseat Commodore chips, and how to replace a Commodore PLA chip.

Check out more Commodore SX-64 videos here

Watch the complete Commodore SX-64 restoration here

Jon’s Crazy Commodore SX-64 (Retro Tech Rogue Trip 01)

My friend Jon Esparza (@jonscrazytweets) discovered a rare Commodore SX-64 while going through his late father’s storage unit. Knowing that I was a retro computer enthusiast, he gave me a call to see if I was interested in doing something with it. So of course I took a road trip to south San Diego to see this “Commodore laptop” in person (and get some bomb tacos)! Jon was kind enough to let me take this Commodore SX-64 off his hands and see if I could get it in any better shape than it’s currently in. This is going to be a rough Commodore restoration, so be sure to stay tuned for the next installment!

Check out more Commodore SX-64 videos here

Watch the complete Commodore SX-64 restoration here

Check out Jon’s Crazy Stuff: http://jonscrazystuff.blogspot.com/

Music by EOX Studios “You On The Dance Floor” by Silverimage “Space Traveler” by Anders Enger Jensen Used with permission, available from http://eox.no or on SoundCloud https://soundcloud.com/eox-studios/

Replacement Transit Card for Commodore 64/VIC-1540/1541/1571

One of the finishing touches that got cut from the Project Essex Commodore SX-64 restoration video on element14 presents was replacing the “transit card” (officially known as the “Head Vibration Protector”) from the 1541 floppy diskette drive. The transit card is a specially-shaped piece of heavy card stock that slides into the disk drive and holds the head assembly in place to prevent damage during transit and is essential to taking proper care of the SX-64 due to its “portable” nature. This card will replace Commodore part number 251171-03 and fits all Commodore 5.25″ floppy disk drives.

To build it, I printed the attached PDF at 100% (no scaling) on 110lb card stock paper, then glued a second sheet (doubling the weight) before cutting out the design. You’ll need to cut out the center hole for the spindle to fit through as well.

Slide the card into the drive like any diskette and close the latch any time you’re going to be moving the assembly (or just keep it in there for storage)!

Download Commodore 1541/1571 Transit Card