I finally got my AvE shop ruler direct from the Empire of Dirt in Western Bring Cash Canuckistan! Here, I’ll take a few minutes to walk through the requisite soldering what for assembling and at the end of the vijayo I’ll giver a proper-type review!
TRANSCRIPT:
1
00:00:10,720 –> 00:00:24,430
If the women don’t find you handsome, they should at least find you handy!
2
00:00:24,430 –> 00:00:35,670
Aha! I think this is my ruler!
3
00:00:35,670 –> 00:00:43,739
Sealed in a mayonnaise jar underneath Funk
4
00:00:43,739 –> 00:00:47,309
and Wagnall’s front porch for the past 24 hours
5
00:00:47,309 –> 00:00:53,549
This is the ruler! Aha! It’s here!
6
00:00:53,549 –> 00:00:54,809
“Hello and thank you for picking up a ruler
7
00:00:54,809 –> 00:00:56,789
here’s a link to instruction on how to
8
00:00:56,789 –> 00:00:59,670
assemble your flashlight. In addition to
9
00:00:59,670 –> 00:01:02,640
bolt gauge, I want to add some info that didn’t
10
00:01:02,640 –> 00:01:05,880
fit on the ruler…
11
00:01:18,270 –> 00:01:20,640
so I’ve got all my parts here I’ve got
12
00:01:20,640 –> 00:01:26,009
ruler base battery compartment a little
13
00:01:26,009 –> 00:01:30,810
magnet this thing momentary switch and
14
00:01:30,810 –> 00:01:32,789
of course I’ve got my solder, my iron
15
00:01:32,789 –> 00:01:35,970
here I think I’m okay just I feel like
16
00:01:35,970 –> 00:01:40,289
there’s something missing something ah I
17
00:01:40,289 –> 00:01:45,300
know exactly
18
00:01:45,300 –> 00:01:50,270
it’s Saturday in Orange County
19
00:02:00,850 –> 00:02:18,410
make way for prince Ali
20
00:02:18,410 –> 00:02:25,040
okay so that’s better that’s much better so
21
00:02:25,040 –> 00:02:29,330
we’ve got all of our parts here
22
00:02:29,330 –> 00:02:32,510
and wait on the soldering iron to get hot
23
00:02:32,510 –> 00:02:44,000
there you go yeah all right so so first
24
00:02:44,000 –> 00:02:45,770
things first let’s do the tiniest component
25
00:02:45,770 –> 00:02:49,220
first this is our led in this nice
26
00:02:49,220 –> 00:02:52,190
little protective package here i can get
27
00:02:52,190 –> 00:02:53,720
it open this will be a small miracle
28
00:02:53,720 –> 00:03:01,840
there Oh open now see there
29
00:03:02,700 –> 00:03:07,530
nothing focus anyway so the little T a
30
00:03:11,099 –> 00:03:14,340
it’s essentially we want to say that
31
00:03:14,340 –> 00:03:16,230
we’re going to point it in the same
32
00:03:16,230 –> 00:03:18,750
direction as the little diode icon is
33
00:03:18,750 –> 00:03:20,190
pointing that’s how we’re going to line
34
00:03:20,190 –> 00:03:24,180
it up we’re going to take our little guy
35
00:03:40,010 –> 00:03:52,640
at least one side’s on there pretty good looks
36
00:03:52,640 –> 00:03:53,720
like it’s on there pretty good hopefully
37
00:03:53,720 –> 00:03:57,739
feel like it’s on there pretty good I’m
38
00:03:57,739 –> 00:04:00,440
twisting you’re looking all right that’s
39
00:04:00,440 –> 00:04:03,650
one down all right now let’s do the
40
00:04:03,650 –> 00:04:10,099
better let’s do the switch here all
41
00:04:10,099 –> 00:04:13,760
right just about make sure it’s good
42
00:04:13,760 –> 00:04:19,910
squared when you have too much caffeine
43
00:04:19,910 –> 00:04:22,699
in your system try to do some precision
44
00:04:22,699 –> 00:04:29,750
it’s got a little bit of shakes that’s
45
00:04:29,750 –> 00:04:45,379
really fine work
46
00:04:58,160 –> 00:05:00,500
looks like it’s on there pretty good all
47
00:05:00,500 –> 00:05:10,280
right then get our battery deal okay so
48
00:05:10,280 –> 00:05:19,099
battery assuming goes on like this go
49
00:05:19,099 –> 00:05:21,889
upside down I wouldn’t go upside down
50
00:05:21,889 –> 00:05:24,280
would it
51
00:05:31,120 –> 00:05:34,540
this little guy gets hot. why am i doing this without gloves?
52
00:05:34,540 –> 00:05:39,910
one thing’s for certain I gotta bend
53
00:05:39,910 –> 00:05:44,620
these guys back in place these little contact
54
00:05:44,620 –> 00:05:48,669
pads bent out of shape not sitting right
55
00:05:48,669 –> 00:05:53,020
break out the good stuff a little bit of
56
00:05:53,020 –> 00:06:00,520
this keep it yeah there you go big ol
57
00:06:00,520 –> 00:06:03,120
blob on there
58
00:06:12,700 –> 00:06:15,610
fantastic look how much faster that
59
00:06:15,610 –> 00:06:21,940
works that’s all we needed the right
60
00:06:21,940 –> 00:06:31,270
tool for the job okay there’s I just got
61
00:06:31,270 –> 00:06:33,160
to grab a glue gun and glue my magnet
62
00:06:33,160 –> 00:06:34,780
in place and I think we’re gonna be good
63
00:06:34,780 –> 00:06:37,810
hope we’re going to be good anyway I’m
64
00:06:37,810 –> 00:06:50,680
gonna find a battery
65
00:06:50,680 –> 00:07:00,190
easier said than done folks
66
00:07:00,330 –> 00:07:18,389
stay there all right here we go all
67
00:07:18,389 –> 00:07:20,550
right then we just gotta put a battery in her and
68
00:07:20,550 –> 00:07:23,699
see what happens okay so I ran down to
69
00:07:23,699 –> 00:07:25,169
the radio shack that’s going out of
70
00:07:25,169 –> 00:07:27,300
business and I grabbed a little button
71
00:07:27,300 –> 00:07:29,789
cell this is a twenty thirty two button cell
72
00:07:29,789 –> 00:07:32,699
so we will see what this thing does now
73
00:07:32,699 –> 00:07:36,569
right what’s that night and they’re just
74
00:07:36,569 –> 00:07:40,860
just so we’re working fun make sure
75
00:07:50,460 –> 00:07:57,120
works a little light going ok so this is
76
00:07:57,120 –> 00:07:58,770
the kind of a cool little thing so it’s
77
00:07:58,770 –> 00:08:01,439
great if you are new to soldering if
78
00:08:01,439 –> 00:08:04,229
you’re not great at soldering and I’m
79
00:08:04,229 –> 00:08:07,979
not a master of it so so it’s great if
80
00:08:07,979 –> 00:08:10,409
you’re not if you need practice at
81
00:08:10,409 –> 00:08:13,680
soldering this is a great little cheapo
82
00:08:13,680 –> 00:08:16,259
fun little thing to do especially
83
00:08:16,259 –> 00:08:17,759
with the surface mount components cuz
84
00:08:17,759 –> 00:08:20,660
that’s a base again those are hard
85
00:08:20,660 –> 00:08:24,320
anyway so there you go you’ve got got
86
00:08:24,320 –> 00:08:26,600
your PCB material and a little fun
87
00:08:26,600 –> 00:08:30,350
little printing things on here so the
88
00:08:30,350 –> 00:08:34,610
millimeter scale let’s just go ahead and
89
00:08:34,610 –> 00:08:38,150
check to accuracy here not that I doubt
90
00:08:38,150 –> 00:08:45,020
but now this is of course my
91
00:08:45,020 –> 00:08:47,720
horror fright harbor freight
92
00:08:47,720 –> 00:08:50,720
caliper here digital calipers I mean
93
00:08:50,720 –> 00:08:53,150
it’s not a hundred percent accurate so
94
00:08:53,150 –> 00:08:54,920
it’s going to get a pretty darn close
95
00:08:54,920 –> 00:09:07,190
151 10 meters right there that is right
96
00:09:07,190 –> 00:09:09,850
on the line
97
00:09:09,850 –> 00:09:13,329
15 centimeter so pretty darn accurate
98
00:09:13,329 –> 00:09:16,600
there good job and then on the back we
99
00:09:16,600 –> 00:09:23,139
have inches here in 16 we have inches
100
00:09:23,139 –> 00:09:25,540
again in 32 so we’ve got both
101
00:09:25,540 –> 00:09:27,430
scales there and of course you got your
102
00:09:27,430 –> 00:09:29,319
bolt hole scales which you can
103
00:09:29,319 –> 00:09:33,339
cross-reference with the tables that he
104
00:09:33,339 –> 00:09:36,910
was so kind to send along and we have
105
00:09:36,910 –> 00:09:39,699
our gap width in thousands and see what
106
00:09:39,699 –> 00:09:47,079
we got here inches we’re going to go
107
00:09:47,079 –> 00:09:50,500
down hundreds on the so I guess that’s
108
00:09:50,500 –> 00:09:53,259
kind of weird but I low multiples of 10
109
00:09:53,259 –> 00:09:56,829
I can be more free time 10,000 would be
110
00:09:56,829 –> 00:10:03,480
point one in so it’s pretty accurate
111
00:10:03,480 –> 00:10:09,930
we can do 30 let’s get 33 inch and looks
112
00:10:09,930 –> 00:10:16,889
pretty accurate and 44 in people pretty
113
00:10:16,889 –> 00:10:19,470
accurate there and then on the side of
114
00:10:19,470 –> 00:10:21,600
course we have the more vernacular
115
00:10:21,600 –> 00:10:24,960
measurements here
116
00:10:24,960 –> 00:10:28,470
mediterranean and from experience i can
117
00:10:28,470 –> 00:10:32,550
know you that yes these are accurate hey
118
00:10:32,550 –> 00:10:34,170
and then of course there’s a little
119
00:10:34,170 –> 00:10:40,110
magnet here there it is yeah pretty
120
00:10:40,110 –> 00:10:45,060
strong neodymium magnet there so that’s
121
00:10:45,060 –> 00:10:49,110
really it that is AvE’s shop ruler
122
00:10:49,110 –> 00:10:51,870
version 1 point 0 and the fun little toy
123
00:10:51,870 –> 00:10:53,670
and it’s something I’m definitely going
124
00:10:53,670 –> 00:10:57,450
to keep on my desk and so that’s a
125
00:10:57,450 –> 00:11:00,570
that’s pretty much it you know go and
126
00:11:00,570 –> 00:11:03,210
pick one up and for his channel and if
127
00:11:03,210 –> 00:11:04,950
you enjoyed this video be sure to click
128
00:11:04,950 –> 00:11:06,330
that like button share it with your
129
00:11:06,330 –> 00:11:07,560
friends and don’t forget to subscribe
130
00:11:07,560 –> 00:11:10,260
for more interesting stuff meanwhile
131
00:11:10,260 –> 00:11:24,000
until next time
One thought on “AvE Shop Ruler Assembly and Review”