How To Use Guitar Hero/Rock Band Controllers in Windows

Clone Hero is the pinnacle of development in the “pretending to be a rock star by pressing buttons on toy instruments” genre of gaming, combining all songs from every Guitar Hero and Rock Band title into one open-source, customizable experience. Unfortunately, through some brilliant decision at Microsoft, the wireless guitar controllers for Rock Band and Guitar Hero no longer work with the official Xbox 360 wireless dongle.

Enter the Chinese Xbox 360 Wireless Receiver dongles that are advertised all over eBay.

They’re cheap, and they work, but they need a little jiggery-pokery to get started.

The first thing you’ll need is the official Microsoft drivers for the official wireless dongle. They’re somewhat difficult to find, but there is an archive available here. Extract the files for your version of Windows.

Plug in the dongle’s USB cable and open the Device Manager. The dongle should show up as “Other Devices > Unknown Device”. Right-click the device and open it’s properties. On the Details tab, look for the device’s hardware ID. It should list as 02A9, 0291, or 9244. Make note of the ID number.

Go back to the extracted driver archive and dig in until you find xusb21.cat and xusb21.inf. Open xusb21.inf in Notepad and use the Find-Replace function to locate all of the instances of “0719” and replace them with the hardware ID that you noted earlier. Rename xusb21.cat to something else. At this point, the official Microsoft driver is now an unsigned driver, and Windows will consider it a security threat. You may need to disable driver verification temporarily while you install the driver.

Back in the Device Manager, right-click the device and select “Update Driver Software”. Browse for your driver and point it to the modified xusb21.inf file. Windows will warn about using an unsigned driver. Push through and finish the installation. The device should now show up as “Xbox 360 Wireless Receiver for Windows” under the Xbox 360 Peripherals heading.

Sync your guitars like you would normally (push the Guide button on the guitar to turn it on, then press the button on the dongle, then press the Sync button on the guitar). The dongle can handle up to 4 wireless controllers for those party time supergroups! Rock on!

Sources:

https://www.s-config.com/chinese-xbox-360-wireless-receiver-driver-setup/

[Guide] How to get it working: connecting Chinese/third party USB receiver for Xbox 360 guitar! (Tested with World Tour controller.) from CloneHero

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.