Now that we’ve learned the secret to getting WinLIRC to run correctly, it’s time to decode those signals into commands that Windows can use. To do this, we’re going to use a powerhouse automation tool that is unique to Windows called EventGhost.
EventGhost is a plugin-extensible application that takes input from any myriad of devices or programs and, through the use of a simple IF/THEN programming setup (think IFTTT), calls the desired response within Windows, a particular application, or even connected devices.
Getting the VCR remote set up in EventGhost was more of a headache than I anticipated, and required a lot of scanning fora and a little noodling to get working correctly. However, once I found the proper combination of versions, plugins, and conditions, it’s working like a champ!
First, you have to download and install EventGhost. At the time of this writing, the newest version (0.4.1.r1700, released 4 Mar 2015) seems to be the culprit behind my inability to get the plugins working, so make sure you go with (as of right now) v0.4.1.r1694, released 27 Jan 2015. If there is development between now and the time you’re working on this, just bear this tip in mind if the latest version does not seem to be working.
When you first run EventGhost, there will be quite a bit of detritus that you won’t likely need already programmed as examples. Disable or delete everything in the Configuration Tree except “Volume Control”The default configuration tree.
To enable remote control commands, you must activate the MCE Remote plugin. To add the plugin, choose “Add Plugin…” from the “Configuration” menu.
Select “Microsoft MCE Remote” from the list.
Do not install the version marked for Vista/Win7 as it is rather finicky and difficult to work with, requiring the installation of an alternate MCE IR service that is buggier than that scene in Temple of Doom.Pictured: Attempting to work with AlternateMceIrService in Windows 7 (CREDIT: LucasFilm)
The settings for this plugin will allow you to set a custom button release timeout, which will be handy if your system is registering multiple button presses from your remote. I have mine set to 0.75 seconds, which seems to be just enough time. Play around with this setting to find something that works for you.
Additionally, the settings dialog will prompt you to disable HID service for the remote. You do not need to do this except under special circumstances. The HID service in Windows 7 works fine.
Test to make sure that the correct button presses are being registered in the left sidebar. If they are, congratulations! Your remote is now working in Windows and you can customise buttons to your heart’s content!