Having reliable FTP access to a remote computer running Linux can be especially useful if said computer is to be a media server and connected to a screen ten feet across the room. For the VCR project, and for any Linux project, I recommend using vsftpd for its simplicity and active development.
To install vsftpd, simply type the following command in Terminal:
sudo apt-get install vsftpd
Once installed, you will need to edit the configuration file to authenticate users and enable write access (if you’re going to be using it as such). Use Nano (or whichever text editor you prefer) to edit /etc/vsftpd.conf and change the following values:
Reboot and your FTP server will be running in background, ready for action!
I was working with the VCR today when, after a reboot, all the USB ports went dead. After much consternation (and a little bit of cussing), I was able to determine a solution.
Fortunately, I already had TeamViewer installed, so jacking in remotely was a snap. Without any kind of remote access, this process would be nigh impossible since the entirety of input devices are USB.
- Navigate to Control Panel -> Hardware and Sound -> Device Manager (listed under Devices and Printers).
- The last item in the tree should be Universal Serial Bus Controllers.
- Expand the USB Controller branch to expose the list of USB devices connected to the computer.
- Right-click and uninstall each of the listings, thus removing it from the system. One or more of the controller drivers was likely corrupted and removing all of them will ensure a clean installation.
- Reboot and allow Windows 7 to recognise and reinstall all the connected USB devices. Everything should work like new again!
More information on this problem as well as other solutions can be found here.
If you’re like me and enjoy delving into a little hackery on your devices to make them “function correctly”, then welcome! I did a little futzing around with my Galaxy S to try and get a particular email notification working, so I thought I may share the process with you all here. First and foremost, you must have enabled root access on your phone, so go check that post out if you haven’t already. As always, no warranty is implied and you might void your warranty following this procedure. Perform at your own risk!
You will need:
Galaxy S phone with root access
Computer with Audacity installed and Bluetooth connectivity
Root Explorer application installed
- Open the sound file you wish to use with Audacity.
Export the sound as *.ogg (Ogg Vorbis) format.
Rename the new file “22_FILENAME.ogg” where FILENAME is some short name describing the file.
Bluetooth transfer the file to your phone.
Open Root Explorer on your phone.
Navigate to ../sdcard/bluetooth/
Tap-hold the filename to bring up the options menu.
Click “Move” from the dialog.
Navigate to ../system/media/audio/notifications/ and make sure that “Mount R/W” is selected.
Exit Root Explorer and reboot your phone.
Change your sound settings and enjoy!
I’m going to link you to a couple files that I used and, specifically, the email notification that I specifically figured this process out for. Enjoy!
‘Free like a puppy’ is certainly much, much better than an atrociously priced and uncontrollably incontinent, rabies-infected mad hound.
Posted on Android Authority (www.androidauthority.com)
Admittedly, this is more for my own future reference, and a little behind the times (this tutorial is based on Eclair and Froyo), but if any of you still have a first-generation Samsung Fascinate (Galaxy S), you may find this handy. Rooting the phone was the first thing that excited me about getting an Android phone, and is still one of my biggest selling points. Verizon tends to bog their phones down with lots of bloatware that comes preinstalled, whose removal is otherwise prohibited, and requires a separate purchase or subscription to use (BAD, VERIZON! BAD!).
Before you follow the tutorial in the video, you will need to download and unzip the following archive:
From there, it’s as simple as following the directions laid out in this video:
Enjoy your newly freed Android OS!
There’s been a lot of buzz about this extension for OpenOffice.org that will allow you to sync your documents with Google Docs. I ran across it looking for a solution to my (apparently not unique) problem of automating a system of backing-up documents to Google Docs. Ubuntu users will have to uninstall their out-of-the-box version of OOo and reinstall via terminal before this will work. The setup is actually pretty simple:
1. From the Ubuntu main menu, select Add/Remove Programs.
2. Search for “openoffice”, and uncheck all the installed components. OpenOffice.org Drawing may give you a required package error, but this is no problem. Uninstall the other components, then go back to uninstall Drawing.
3. From the terminal: sudo apt-get install openoffice.org
4. Download the extension here.
5. From the OOo main menu, select -> (Alt-T-E for those who like keyboard shortcuts.)
6. Click “Add…”, select the downloaded file (“gdocs[version number].odx” or something to that effect), and “Open”. The extension will then install. Click “Close” when complete and restart OOo.
You should notice a new floating toolbar with 5 icons. The first two (from the left) are specific to Google Docs (upload and download respectively). The latter are for Zoho and WebDAV, which I don’t use (at least at this point). Click either of the GDox buttons and you will be prompted for your username and password. The rest is fairly self-explanitory.
The only gripe I have with this extension is the lack of true document synchronization. When uploaded, multiple copies of the same document will exist on the Google server until you manually delete them. This is currently under revision and should be fixed when the update is released.
Calendar synchronization has been the main reason I haven’t used Google Calendar or the native BlackBerry calendar has been a lack of synchronicity. I’m just annoyed with the idea of having to enter multiple instances of an event in multiple places, so I never used them. Facebook got smart and integrated calendar sync with the new Facebook for BlackBerry, and now I can keep track of my Facebook events with my Storm. I finally found where Google has developed a sync application that updates the calendar and contacts list.
“Using your BlackBerry smartphone’s native calendar, you can now access your Google calendar even when you don’t have network coverage and be alerted for upcoming appointments with sound or vibration. Your Google Calendar stays synchronized whether you access it from your computer or your phone. You can add or edit entries right on your BlackBerry smartphone or on your Google Calendar on the web.”
Just point the BlackBerry browser to http://m.google.com/sync.
So I recently (last week) upgraded my lappy to Ubuntu 9.04 Jaunty Jackalope, and, so far, I’m a fan. I’ve been using Ubuntu for nearly two years now (since Feisty Fawn) and have only briefly looked back at Windows or over at Macintosh just for a sense of ubiquity and compatability. With Jaunty, I’m content with the slick new interface combined with the traditional ease of use that Ubuntu has come to offer.
I am by no-means an expert with Ubuntu–or Linux, for that matter–but I am a long-standing fan of Open Culture and Open Source. I’ve been working with Windows for years trying to come up with ways to tweak it and customize it to fit my own personal tastes and expectations, so, naturally, Linux was a Godsend with its seemingly endless customization options.
I started this blog with the idea that I would keep it as a repository for all the knowledge I’ve collected from the seemingly endless changes and tweaks I put my systems under. Mainly as a way to organize them and recall them in case of other blogs and forums going by the wayside. Second, I thought that others might have the same questions that I did and would like an easier method of finding answers than scouring hundreds of pages of forum posts.
Last thing of note for this introduction, the name is not a typo. Well, it is (and probably a common one), but intentional as I like the play on words implied (Ubuntu Nut, Ubunut). The only other semi-clever idea I could come up with was “Sit, Ubu, Sit.”